| B3
Series |
Small
CNC Bed Mills for Job Shops and Tool Rooms |
|
B3FC
Quill type Head The Arump B3FC CNC bed mill is
equipped with a quill type head. Hi/ Lo range 2 speed spindle
provides torque for cutting hard to machine materials. Can
be used manually, as a 2 axis or a 3 axis CNC. Conversational
programming with standard features like Irregular Pocket
Cleanout, Threadmilling, Countouring, Teach Mode, Math help,
wide variety of fill in the blank canned cycles and much
more. This machine will add amazing CNC capability to your
shop. click
here for more info and specs..
|
 |
B3EC
Rigid Head The
Atrump B3EC CNC Bed Mill features a tough cast iron
design that is fully webbed for maximum vibration damping
and rigidity. The wide saddle supports the X axis on
square ways. Class 7 spindle bearings provide smooth
cool running spindle with very low runout. The B3's
make use of zero lash 1.25" precision ground double
nut ballscrews. The B3EC is equipped with a rigid head.
Hi Lo range 2 speed spindle provides torque for cutting
hard to machine materials. click
here for more info and specs |
| E5
Series |
Medium
Sized CNC Bed Mills, larger travels and more HP than B3 series |
 |
E5FC
Quill Type Head With 35" of
X travel and a 54"x10" table, the E5 series Bed
mills feature a tough cast iron design that is fully webbed
for maximum vibration damping and rigidity with box ways
on the Y and Z axis, a wide saddle supports the X axis
for nice surface finishes and accurate parts. click
here for more info and specs..
|
 |
E5EC
Rigid Head The E5EC is equipped with a Rigid type head
for heavy cutting. These machines can run on single phase
220 volts or three phase power. Perfect as a second operation
machine or as a primary CNC milling machine in the shop. click
here for more info and specs..
|
| E6
Series |
Medium
Sized CNC Bed Mills, larger travels and more HP than E5 series |
 |
E6FC
Quill Type Head 41"" of X travel and a 52"x14" table,
the E6 series Bed mills feature a tough cast iron design
that is fully webbed for maximum vibration damping and
rigidity with box ways on the Y and Z axis, a wide saddle
supports the X axis for nice surface finishes and accurate
parts.The E6FC is equipped with a Quill type
head with Hi Lo range for torque multiple for for heavy
cutting. These machines can run on single phase 220 volts
or three phase power. Perfect as a second operation machine
or as a primary CNC milling machine in the shop. click
here for more info and specs..
|
|
E6EC
Rigid Head The E6EC is equipped with a Rigid type head
for heavy cutting. These machines can run on single phase
220 volts or three phase power. Perfect as a second operation
machine or as a primary CNC milling machine in the shop. click
here for more info and specs..
|
| E8
Series |
Large
CNC Bed Mills, larger travels and more HP than E6 series |
 |
E8FC
Quill Type Head 50" of X travel and a 56"x18" table,
The E8FC is equipped with a Quill type head with Hi Lo
range for torque multiple for for heavy cutting. These
machines can run on single phase 220 volts or three phase
power. Perfect as a second operation machine or as a primary
CNC milling machine in the shop. click
here for more info and specs..
|
 |
E8EC
Rigid Head 50" of X travel and a 56"x18" table,
The large E8EC is equipped with a Rigid
type head for heavy cutting.
Perfect as a second operation machine or as a primary CNC milling
machine in the shop. click
here for more info and specs..
|
